Digital Audio Output - Panasonic Diga DMR-PWT500 Operating Instructions Manual

∫ Digital Audio Output

Sound
Digital Audio Output
Digital Audio Output
PCM Down Conversion
Dolby D / Dloby D+ / Dolby TrueHD
DTS / DTS-HD
MPEG
BD-Video Secondary Audio
PCM Down Conversion
Select how to output audio with a sampling frequency
of 96 kHz.
≥It will be converted to 48 kHz regardless of the setting
in the following cases.
– The signals have a sampling frequency of over
96 kHz.
– The disc has copy protection.
– "BD-Video Secondary Audio" is set to "On". ([BD-V])
≥If "Off" is selected, signals are output as 96 kHz
≥If "On" is selected, signals are converted to 48 kHz.
(Choose when the connected equipment cannot
process signals with a sampling frequency of 96 kHz.)
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
≥Select "PCM" when the connected equipment cannot
decode the respective audio format.
≥Not making the proper settings may result in noise.
BD-Video Secondary Audio
([BD-V] with secondary audio)
Turn on/off the clicking sound on the menu and audio
with secondary video.
If "Off" is selected, the primary audio only is output.
∫ Audio Delay
Mis-sync between the video and audio is corrected by
delaying the audio output.
∫ Audio Type for Digital Broadcast
If the programme has more than one track (Dolby Digital,
MPEG, etc.), you can set priorities.
≥This setting will give effect in the following conditions.
– The default setting when watching broadcasts.
– The default setting when playing back the title recorded
in DR mode.
– File Conversion ( 47)
– Normal speed copy from the title recorded in DR mode.
( 50, 52)
∫ Audio for HG / HX / HE / HL / HM
Recording
If the programme has multi channel audio, priority is given to
what you select.
≥This setting will give effect in the following cases.
– File Conversion ( 47)
– Normal speed copy in HG, HX, HE, HL or HM mode from
a title recorded in DR mode. ( 50, 52)
79
VQT3C84