To Release The Door Lock - Hitachi BD-W3300 Instruction Manual

About opening and closing the door
If you want to open the door during operation (Continued)
When [HIGH] indicator lights up, because the inside is very hot, the door can't be opened until it inside of the machine is cooled down.
If button is pressed and the [HIGH] indicator blinks, it will start the cooling process.
The door lock will be undone after the cooling process for 3 to 15 min.
If pausing during drying, depending on the amount of time elapsed, the machine may turn itself off after cooling and adding softener water
for 1-2 minutes.
(The elapsed time is 15-40 minutes after the start of drying, and varies depending on the setting and the load.)
When PAUSE button is pressed in operation of softening protection, the door lock will be undone, and power turned off.
If the WASH > DRY operation is paused, the laundry may not be dried fully with addition of a lot of laundry (more than 2kg). Please perform
the drying operation again.
During spinning or after the spinning finishes, do not touch the tumbling drum, the metal parts around the door, the right upper part of the
machine body and the laundry (with zips or metal buttons).
Otherwise, you may be burnt.
Turn the power [ON].
If the power is turned off during operation or in case of power failure, the door is locked.
In case the tumbling drum is very hot, the door lock will be released after the cooling process finishes.
There is water remaining in the tumbling drum and the water level exceeds for which the door can be opened.
Press , button once, and then press
Press
Press
Press
If the tumbling drum starts rotating, press
If the indicator is off, open the door.
32

To release the door lock

When the power is [OFF]
To pause during washing
button and select [FUZZY] program.
button to drain off water.
When drying
button to pause.
(Continued)