Table of Contents
Advertisement
Drying operation can not be
performed with automatic operation
(Max 6 hrs)
Door can not be locked or released
There is an operation error with the vibration sensor
LINT
FILTER
The lint filter is not installed?
LINT
FILTER
Lint filter blockage
Spinning fails
Excessive drying load
The tumbling drum can't rotate.
DRY
FILTER
Lint filter blockage
Stop using the machine in case of the following and contact the Eco Center.
If the same display appears again and again even after checking the items mentioned in Adjustment Method after the aforementioned COO display has appeared.
If the same display appears again and again even after restarting the power after the aforementioned FOO, COO display has appeared.
80
Is the dry filter or dry filter inlet blocked?
Clean if they are blocked.
Appears when [WASH DRY] or [DRY] operation is operated 25 times. (It
may appear even when only little amount of lint has accumulated)
Press
to
turn off the
Has the laundry been spun? Is the laundry wound?
power supply.
Is the water fed correctly? (Water may be used during drying operation for cooling purpose)
Check the adjustment method described in case of [C01] display.
Is the drain hose set correctly?
Check the adjustment method described in case of [C02] display.
Press
to
Is the door closed securely?
pause.
The door lock may not be released fully.
Press
to turn off
The vibration sensor may be activated improperly due to external
the power supply.
noise.
The lint filter is not properly installed.
Turn the lint filter rightwards until a click sound is heard.
Is the lint filter blocked?
Press
to turn off
Clean if they are blocked.
the power supply.
This is displayed when Wash or Washing-Drying operation is performed for 30 times.
(It may appear even when only little amount of lint has accumulated)
Is the drain hose set correctly?
Press
to
Check the adjustment method described in case of the [C02] error display.
pause.
Is there a lot of foam generated?
Spin the laundry after performing the rinse operation once.
Is the washing load too much?
Press
to
pause.
Reduce the washing load.
(The available washing load for drying varies with the type, size, and fabric material of laundry.)
Is the washing load too much?
Reduce the washing load.
Is the laundry wound?
Unwind the laundry.
Press
to
pause.
Is the amount of foam generated too much?
Spin the laundry after performing the rinse operation once.
Is the extension power cord used?
Are there any other appliances connected to the same outlet?
Is the dry filter or dry filter inlet blocked?
Clean if they are blocked.
filter, the Dry Filter display may appear when the power is turned
Press
to turn off
on. It can be cancelled by pressing the Start button)
the power supply.
Appears when [WASH DRY] or [DRY] is operated for 25 times. (It
may appear even when only little amount of lint has accumulated)
(P.105)
Check the following items
(P.73, 74)
(P.71, 72)
(P.73, 74)
(even after cleaning the dry
After checking
Press
to start
the operation
After checking
Press
to start the
operation
After checking
Press
to start
the operation
After checking
Press
to
start the operation
After checking
Press
to start
the operation
After checking
(P.79)
Press
to
start the operation
(P.55)
After checking
Press
to
start the operation
After checking
Press
to
start the operation
(P.55)
After checking
Press
to start
the operation
Hide quick links:
Advertisement
Table of Contents
