Setting The Sleep Timer - Sony XDR-F1HD Service Manual

XDR-F1HD
Changing the display
mode and settings
To change the display mode
Press DISPLAY.
When an analog radio station is received
FM
x
FM
A Field strength level indicator
B Preset number*
C Band
D Frequency
E Current time
* When you tune in a station by selecting a preset
number.
When an analog FM broadcast that supports RBDS
(Radio Broadcast Data System) is received
FM
x
FM
x
FM
A Field strength level indicator
B Preset number*
C Band
D Station name
Name of station currently tuned in.
E Frequency
F Current time
G Text information
Text information transmitted from station.
* When you tune in a station by selecting a preset
number.
Note
broadcast or the station.
4
When an HD Radio station is received
FM
x
FM
x
FM
A HD indicator
HD indicator Reception status
Stays lit Strong HD signal, digital reception*
Weak HD signal, analog reception
Flashes
Not displayed No HD signal, analog reception
*
then stays lit.
B Field strength level indicator
C Preset number*
D Call sign
E Band
F Song title/artist name
G Channel number (FM only)
Appears when HD Radio broadcasts multiple
program.
Press TUNE + or – to select a sub channel.
H Frequency
I Current time
J Station name
K Text information
* When you tune in a station by selecting a preset
number
Note
broadcast or the station.
To change the display settings
(BRIGHTNESS/CONTRAST)
1
Press MENU to show the menu display.
Press SELECT M or m to select
2
"BRIGHTNESS" or "CONTRAST, " then press
ENTER.
Press SELECT M or m to select the setting or to
3
adjust the level, then press ENTER.
BRIGHTNESS:
"HIGH, " "MIDDLE" or "LOW. "
CONTRAST:
11 levels.
Note
If you do not set the menu within 10 seconds, the setting
Tip
You can adjust "BRIGHTNESS" directly by pressing
BRIGHT on the remote commander.

Setting the sleep timer

You can enjoy falling asleep to the radio using the built-
a preset duration.
1
Press SLEEP on the remote commander.
"SLEEP" and the digits for the sleep timer duration
appear.
FM SLEEP
If you press SLEEP
unit is turned on.
2
Press SLEEP repeatedly to select the desired
sleep timer setting.
Each press changes the setting time as follows:
60 45 30 15
when the duration time is set.
is passed.
To change the sleep timer setting
You can press SLEEP repeatedly to select the desired
activated.
To deactivate the sleep timer
Press ?/1
elapsed, or press SLEEP repeatedly to set the sleep timer
to "SLEEP OFF" in step 2.
Note
remote commander.
Resetting the unit
Press this button with a pointed object if the radio fails
have preset, etc., will revert to the factory preset.
Using the remote
commander
Buttons shared on both the remote commander and the
unit control the same functions.
HD SCAN button
stations are received for 3 seconds in order of frequency.
SCAN button
stations are received for 3 seconds in order of frequency.
BRIGHT button
To adjust the brightness of the display.
OFF