2-2 Uninstalling Initial Setting Tool
(1) To uninstall Initial Setting Tool, click [Start], point to
click [Control Panel] to open Control Panel.
(2) Double click [Add/Remove Programs] displayed in the Control
Panel window. A list of installed programs will appear. Click [G-50A
Initial Setting Tool] and click [Remove] to uninstall Initial Setting
Tool.
2-3 Starting and Closing the Program
(1) To start the program, click [Start], point to [Programs], point to
[G-50] and click [Initial Setting Tool].
(2) When Initial Setting Tool starts, an IP address input dialog will
appear. Enter the IP address of the G-50A to be connected, and
click [OK].
If you do not plan to connect to a G-50A, and only wish to create
setting data, simply click [OK].
When shipped, the G-50A s IP address is set to [192.168.1.1]. In
order to successfully establish communication with the G-50A, the
IP address of your PC must be [192.168.1.*].
(3) To close the program, click [File] then [Exit] from the Initial Setting
Tool menu.
Settings] and
[
-3-