Initial Setting And Automatic Refresh Setting Using Gx Configurator - Mitsubishi Electric MELSEC-Q Series User Manual

8 COMMUNICATION WITH INTELLIGENT FUNCTION MODULE

8.2 Initial setting and automatic refresh setting using GX Configurator

(1) Initial and automatic refresh settings of intelligent function modules
(2) Setting using the
8 - 2
Installing the GX Configurator compatible with the intelligent function module
enables the initial setting and automatic refresh setting with GX Developer.
When the initial setting and automatic refresh setting of the intelligent function
module is designated with GX Developer, you can write/read data without
creating the program for the communication with the intelligent function module.
Moreover, you can conduct the initial setting or automatic refresh setting without
designating the buffer memory address of the intelligent function module.
GX Configurator
This section describes the example to set the initial setting and automatic refresh
setting of A/D conversion module Q64AD.
(a) Initial setting
The initial setting of Q64AD offers the following four settings:
• Designation of enable/disable A/D conversion
• Designation of sampling/averaging processing
• Designation of time averaging/execution averaging
• Designation of average time/average execution
The initial setting of Q64AD is designated on the following initial setting
screen of GX Configurator.
[Initial setting screen]
The designated initial setting data is stored in the intelligent function
module.
MELSEC-Q
8
8 - 2