Procedure For Writing Program To The Basic Model Qcpu - Mitsubishi Electric MELSEC-Q Series User Manual

12 PROCEDURE FOR WRITING PROGRAMS TO BASIC MODEL QCPU

12.2 Procedure for writing program to the Basic model QCPU

12
12 - 2
The procedure for writing program and parameter created at the GX Developer to the
Basic model QCPU standard ROM is shown below.
When writing program and parameter to the Basic model QCPU program memory, the
steps indicated by asterisks ( ) below are not required.
Procedural steps shown in
shown in boxes are performed in the Basic model QCPU.
START
Start GX Developer.
Set the project.
Do you change
NO
the number of device
points used?
YES
Change the number of device
points in device setting of PLC
parameter.
NO Do you perform
boot operation?
YES
Select "boot from standard
ROM" in boot file setting of
PLC parameter.
Create a program to be
executed in the CPU module.
1)
boxes are performed at the GX Developer, and those
Refer to the GX Developer manual.
Refer to Section 10.1.2.
Device setting screen
Boot file setting screen
Ladder setting screen
MELSEC-Q
12 - 2