Initial Setting Tool; What Is The Initial Tool - Mitsubishi Electric G-50A Technical Manual

15. Initial Setting Tool

15.1 What is the Initial Tool?

This is a tool for group setting of air-conditioners, registration of transmission report on abnormal mail, and
registration of the IP address of G-50A. The conventional central controller (MJ-103MTRA) was required to
input locally group setting and various initial settings such as a name of group, etc. The use of this tool,
however, allows development of data for initial settings in advance to carry out initial settings only with
transmitting those data to G-50A at local site.
In addition, since the following items cannot be set with G-50A without using the initial tool, they must be
registered without fail by means of the initial setting tool.
When transmitting information on abnormal mail: Setting the abnormal mail transmission
When connecting by way of gateway by the use of existing LAN: Registration of a gateway address
When performing centralized control by a Web browser (Without TG-2000A): Registration of a block
setting
100
Figure 15-1 Example of screen for initial setting tool