Mitsubishi Electric G-50A Technical Manual page 45

(2) What is charge?
This represents the charge of electric power, gas or water consumed by each air conditioner or tenant
(In the case of using electric power count by PC direct connect (Watt Hour Meter (RS-485)), only
electric power can be counted). The charge of such consumption can be calculated by the following 2
methods, and the output can be presented in printer output or file output in CSV format.
Calculation for clearing day
On the clearing day registered to TG-2000A, the monthly charge is calculated automatically. The
standard charge is also added. The clearing day may be selected in two ways, from the clearing day
specified or the end of the month. In the case of the clearing day specified, the day of 29
st
31 can not be specified, but the specifying the end of the month conducts clearing at the end of the
month. The result of clearing can be selected for printer output or file output.
Calculation for specified date
The charge may be calculated for any desired period covering 122 days from and including the
former day. (The standard charge is not included.)
Specify when a fixed day is
desired for clearing. However,
the day of 29
Start/finish selection
Select the period to be cleared.
Clearance can be performed
for the past 122 days.
(3) What is the time frame for charging?
The charge of one calendar day can be set with 5 charge units to 10 time frames divided.
This setting can change the charge unit depending on the time frame in the morning, after noon,
overtime or weekend. As the charging unit can be set to each measuring instrument individually
sophisticated operation according to the types of measuring instruments can be performed. However,
the setting of time frame should be applied collectively for each measuring instrument.
Week day button
Clicking displays the menu
of set/cancel/copy/paste.
Charging unit setting
Allows setting the charging
unit of watt-hour meter.
Other measuring instruments
(for city water, gas, calorie)
may be set on other screen
(Measuring instrument unit
price screen).
In the case of electric power count by PC direct connect (RS-485WHM), charging unit (daytime,
nighttime, weekday, weekend and seasons) can be set up.
1
Indicates air conditioning, electricity 1, electricity 2, gas, city water and calorie, five types in total.
Date specified
th th st
, 30 or 31
can not be specified.
Figure 8-2 TG-2000A clearing day specifying screen
Figure 8-3 TG-2000A clearance period specifying screen
Figure 8-4 TG-2000A charging time frame setting screen
Month end specified
Specify when the end of the
month is desired to select.
This setting clears based on
the operating record until the
final day monthly.
Target for calculation
Select the target for clearance.
Time frame dividing mark
Indicates the division of time frame.
Allows dividing each weekday in 10
divisions.
The unit of time is 10 minutes.
Charging time frame
Indicates the time frame for charging.
The content of this setting may
commonly be used for all measuring
instruments.
th th
, 30 or
1
,
41