Epson dreamio EH-R4000 User Manual page 62

Problem Solving
■
Image is truncated (large) or small
Has the correct aspect
selected?
Has the "Position" setting been
adjusted correctly?
Has the computer been set for
dual display?
Only when projecting
computer images
Has the correct resolution been
selected?
Only when projecting
computer images
■
Image colors are not right
Are the image signal format
settings correct?
Are the cables connected
correctly?
Has the image contrast
been adjusted correctly?
Has color been adjusted
appropriately?
Have the color intensity and tint
been adjusted correctly?
Only when projecting
images from a video
source
60
s
Press to select the aspect that corresponds to the input
been
signal. p.19
If images with subtitles are being projected using "Zoom", use the
"Zoom Caption Pos." menu command to adjust the images.
"Signal" - "Zoom Caption Pos." p.40
Use the "Position" the menu command to make the adjustment.
"Signal" - "Position" p.40
If the dual display setting has been activated by the connected
computer, only half of the images on the computer screen is
displayed by the projector. To display the whole of the image on the
computer screen, turn off the dual display setting.
Computer video driver documentation
Set the computer so that the signals that are output are compatible
with this projector.
"List of Supported Monitor Displays" p.74
Computer documentation
If a composite video or S-Video
If projection does not occur when the "Video Signal" menu
command is set to "Auto", select the signal format that matches the
signal source.
"Settings" - "Input Signal" - "Video Signal" p.43
If the signal source is connected to the [Component] input port
If projection does not occur when the "Component" in the "Input
Signal" menu command is set to "Auto", set the signal format that
matches the signal that is being projected from the connected
equipment.
Check that all of the cables required for projection are securely
connected. p.12
Use the "Contrast" menu command to adjust the color.
"Image" - "Contrast" p.38
Use the "Advanced" menu command to adjust the color.
"Image" - "Advanced" p.38
Use the "Color Saturation" and "Tint" menu commands to adjust
the color and tint.
"Image" - "Color Saturation", "Tint" p.38
is being input
"Settings" - "Input Signal" - "Component" p.44