Reading Problem Mail Notification Function - Epson dreamio EH-R4000 User Manual

Problem Solving

Reading Problem Mail Notification Function

When the Mail Notification function is set to On and a problem/warning occurs in the projector, the
following e-mail will be sent.
Subject:
Line 1:
Line 2:
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The following table shows the details that are
given in the message for each item. To deal with problems/warnings, see "Reading the Indicators".
p.54
No-signal
Internal error
Fan related error
Sensor error
Auto Iris Error
Cinema Filter Error
Power Err. (Ballast)
Lamp timer failure
Lamp out
Lamp replacement notification
High Temp Warning
Lens Iris Warning
Cinema Filter Warn
A (+) or (-) appears at the start of the message.
(+): A projector problem has occurred
(-) : A projector problem has been dealt with
64
EPSON Projector
The Projector Name where the problem has occurred
The IP Address set for the projector where the problem has occurred
Message
No Signal
No Signal is input to the projector. Check the connection status
or check that the power for the signal source is turned on.
Internal Error
Fan Error
Sensor Error
Auto Iris Error
Cinema Filter Error
Power Err. (Ballast)
Lamp Failure
Lamp Error
Replace Lamp
High Temp Warning
Lens Iris Warning
Cinema Filter Warn.
Cause