Motorola VC6000 Series Quick Reference Manual page 17

Quick Reference Guide
2. Mount the Combination Antenna outdoors. Contact the mast of the
antenna, by a metal bonding, to a ground wire that runs directly into
the earth, via a deep ground rod. For antenna installation guidelines,
See "Mounting the Combination Antenna (VC6096 only)" on
page 11.
!
WARNING
3. Connect the WWAN plug of the Combination Antenna cable to the
WWAN antenna connector at the back of the VC6000 Series
(VC6096 only). Rotate clockwise to fasten the connector.
4. Connect the WLAN plug of the Combination Antenna cable to the
WLAN antenna connector at the back of the VC6000 Series
(VC6096 only). Rotate counterclockwise to fasten the connector.
5. Attach the 12 V DC cable of the Indoor Power Supply Unit to the
Power Connector at the back of the VC6000 Series and turn clock-
wise to lock. Rotate clockwise to lock the connector.
6. Connect the AC Cord into the Indoor Power Supply Unit.
7. Connect the plug of the AC Cord into a 100-240 V AC / 50-60 Hz
Power Outlet.
The total length of the power supply cables is 4.3 m (14.1 ft.).
NOTE
Keep a minimum lateral distance of 20 cm (8 inches)
between the VC6000 Series user and the antenna.
Contact your professional installer, VAR, or antenna
manufacturer for proper installation requirements.
15