Call Pickup (Direct); Timed Queuing (Outside Line Only); Outside Line Queuing (From Extension Dial Tone); Executive Override - NEC DT300 Series User Manual

Call Pickup (Direct)

Lift handset.
Press Call Pickup Direct key or dial Call Pickup Direct
access code (may be stored on one-touch key).
Called
station
PCK 2000
4:26 PM TUE 12 FEB 2008
Dial extension number to be picked up.
Connection to calling party is established.
Outside Line Queuing
(From Extension Dial Tone)
If Outside Line Is Busy
Press Speaker key or lift handset dial outgoing
access code (e.g.9).
SET
4:26 PM TUE 12 FEB 2008
Receive a Busy indication. Press Call Back key. Call
is placed in queue for next available Outside Line.
Replace handset.
When Outside Line is available, setting station is
alerted by ringing and flashing red LED.
Press Speaker key or lift handset. Dial tone is heard.
Dial desired number. (No outgoing access code
needed.)
Calling
party
2001
Timed Queuing
(Outside Line Only)
Press Speaker key, receive dial tone.
Dial Outside Line access code and desired number.
Receive busy tone or ring no answer from distant
end.
Press Call Back key, LED flashes, leave speaker on.
The desired number is automatically be redialed.
Pick up handset and converse.
NOTE: When station is in Timed Queue mode callers
receive busy indication.

Executive Override

If Called Station Is Busy
Press Override key and converse.
Override
station
OVR 2000
4:26 PM TUE 12 FEB 2008
NOTE: Interrupted parties receive a warning tone.
38
Overridden
2001