Basic Operation; Logout (Dt700 Series Only) - NEC DT300 Series User Manual

3.

BASIC OPERATION

Login (DT700 Series Only)
When login mode is activated, following procedure is
required.
Enter login code and press Set Soft key.
(The station number is used as the Login code.)
Enter the password and press OK Soft key.
If the login code is accepted, display changes to
normal idle status.
4:26 PM TUE 13 APR 2008
MIC DND >>>
21

Logout (DT700 Series Only)

Press the pre-assigned Logout Feature Key on the
terminal.
Note: This location is an example.
Note: Logout button is assigned by data setting at
the ECP (Enterprise Communication Platform).
4:26 PM TUE 13 APR 2008
MIC DND
"LOGOUT?" is displayed on the LCD of the terminal.
4:26 PM TUE 13 APR 2008
L-OUT
Press the Logout Feature Key on the terminal
again.
>>>
>>>