To Establish A Broker Call - NEC DT300 Series User Manual

To Retrieve At Destination:
Lift handset or press Speaker key.
Press line on hold. Use handset to converse.
NOTE: Any station with the destination line
appearance can retrieve the call.
To retrieve From Phone Without Destination Line
Appearance:
Lift handset or press Speaker key
Dial Access Code for Direct Call Pick-Up
Dial destination station's extension
Use handset to converse
Conference
Option 1
With call in progress, ask party to hold.
Press Transfer key, receive interrupted dial tone.
Dial desired number.
After call is answered, press Conf key. Conf LED
lights.
Three-way conference is established.
CNF 2000
4:26 PM TUE 12 FEB 2008
If one party hangs up, other two remain connected.
Conf LED goes out.
2001
Option 2
With call in progress and third party on hold on
another Line/Trunk key.
Press Conf key, Conf LED flashes.
Press Held Line/Trunk key, Conf LED lights.
Three-way conference is established.
NOTE: Access to Option 2 is based on software
revision and data assignment.

To Establish A Broker Call

While engaged in a call and wishing to consult a third
party, press Transfer. Caller is automatically placed
on hold.
Dial desired party to consult.
Press Transfer to return to original caller. Third party
is automatically placed on hold.
Repeated depression of the Transfer button allows
you to alternate between calls.
NOTE: The display indicates connected station or
trunk at any given time.
35