Hitachi D 13VB3 Technical Data And Service Manual
  1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Drill
  5. D 10VJ
  6. Technical data and service manual
Hitachi D 13VB3 Technical Data And Service Manual

Hitachi D 13VB3 Technical Data And Service Manual

10/13 mm (3/8 / 1/2") drill
Hide thumbs Also See for D 13VB3:
Table of Contents

Advertisement

Quick Links

13 mm (1/2") DRILL D 13VB3
10 mm (3/8") DRILL D 10VJ
LIST Nos. D 13VB3: E107
D 13VH: E108
D 10VJ: E106
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MODELS
Hitachi
Power Tools
D 13VH
Nov. 2004
D 13VB3
D 13VH
D 10VJ
TECHNICAL DATA
AND
SERVICE MANUAL
D

Advertisement

Table of Contents
loading

Related Manuals for Hitachi D 13VB3

Summary of Contents for Hitachi D 13VB3

  • Page 1 MODELS D 13VB3 D 13VH D 10VJ Hitachi Power Tools 13 mm (1/2”) DRILL D 13VB3 TECHNICAL DATA D 13VH 10 mm (3/8”) DRILL D 10VJ SERVICE MANUAL LIST Nos. D 13VB3: E107 Nov. 2004 D 13VH: E108 D 10VJ: E106...
  • Page 2 Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows: For Models D 13VB3 and D 13VH Competitors Symbols Utilized...

  • Page 3: Table Of Contents

    8-5. Insulation Tests .......................... 23 8-6. No-Load Current Value ......................23 9. STANDARD REPAIR TIME (UNIT) SCHEDULES ..............24 For Model D 13VB3 .......................... 24 For Models D 13VH and D 10VJ ....................... 25 Assembly Diagram for D 13VB3 Assembly Diagram for D 13VH...

  • Page 4: Product Name

    Hitachi 10 mm (3/8") Drill, Model D 10VJ 2. MARKETING OBJECTIVE The Models D 13VB3, D 13VH and D 10VJ are upgraded versions of the current Models D 13VB2, D 13T2, DUT-13, DUT-10 and DU 10. The performance is greatly improved.

  • Page 5: Selling Point Descriptions

    Thanks to the powerful motor (rated power consumption: D 13VB3: 790 W, D 13VH/D 10VJ: 690 W), the Models D 13VB3, D 13VH and D 10VJ can drill at the class-top speed while it is compact and lightweight. And powerful motor also provides high performance for heavy-duty applications.

  • Page 6: Specifications

    5. SPECIFICATIONS 5-1. Specifications Model D 13VB3 Capacities Steel Low speed: 13 mm (1/2") / High speed: 8 mm (5/16") Wood Low speed: 40 mm (1-9/16") / High speed: 25 mm (1") Drill chuck Mount type: UNF 1/2" --- 20 Capacity: 13 mm (1/2")
  • Page 7 Model D 13VH Capacities Steel Low speed: 13 mm (1/2") / High speed: 8 mm (5/16") Wood Low speed: 40 mm (1-9/16") / High speed: 25 mm (1") Drill chuck Mount type: UNF 1/2" --- 20 Capacity: 13 mm (1/2") Type of motor AC single phase commutator motor Enclosure...
  • Page 8 Model D 10VJ Capacities Steel Low speed: 10 mm (3/8") / High speed: 6 mm (1/4") Wood Low speed: 25 mm (1") / High speed: 13 mm (1/2") Mount type: UNF 1/2" --- 20 Drill chuck Capacity: 10 mm (3/8") Type of motor AC single phase commutator motor Enclosure...

  • Page 9: Comparisons With Similar Products

    6. COMPARISONS WITH SIMILAR PRODUCTS 6-1. Specification Comparisons 13 mm drill class Maker HITACHI D 13VB2 DUT-13 D 13VB3 D 13VH Model Capacities 13 (1/2") 13 (1/2") 13 (1/2") 13 (1/2") 13 (1/2") Steel mm (in.) 32 (1-3/16") 40 (1-9/16") 40 (1-9/16")

  • Page 10: Drilling Speed Comparisons

    6-2. Drilling Speed Comparisons Drilling speed depends on the operating conditions. The test results are based on actual factory tests, and should be used as a reference only. 13 mm drill class Auger bit Test material: Western hemlock Bit dia. (mm) 10 mm drill class Auger bit Test material: Western hemlock...

  • Page 11: Precautions In Sales Promotion

    7. PRECAUTIONS IN SALES PROMOTION In the interest of promoting the safest and most efficient use of the Models D 13VB3, D 13VH and D 10VJ Drills by all of our customers, it is very important that at the time of sales the salesperson carefully ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions, and fully understands the meaning of the precautions listed on the Caution Plate attached to each tool.

  • Page 12: Precautions On Usage

    7-3. Precautions on Usage (1) High-speed/Low-speed changeover Prior to changing speed, ensure that the switch is in the OFF position, and the drill has come to a complete stop. To change speed, rotate the gear shift dial as Gear shift dial indicated by the arrow in Fig.
  • Page 13 (5) Slip clutch mechanism (Only the Model D 13VB3) The Model D 13VB3 is equipped with the slip clutch mechanism to avoid direct and strong reactive force due to a sudden and heavy load by slipping the transmission portion between the motor and the drill bit.

  • Page 14: Precautions In Disassembly And Reassembly

    The numbers in the descriptions below correspond to the item numbers in the Parts List and exploded assembly diagram. The [Bold] numbers are for the Model D 13VB3, the <Bold> numbers for the Model D 13VH, and the (Bold) numbers for the Model D 10VJ.
  • Page 15 (4) Removal of the armature from the inner cover As illustrated in Fig. 6, support the Inner Cover [12] <12> (12) with a tubular jig, and push down on the top of the pinion of the Armature [24] <23> (23). Push.
  • Page 16 8-1-2. Removal of the drill chuck The Drill Chuck [3] <3> (3) is secured to the Spindle [4] <4> (4) with 1/2"-20 UNF (right hand) and Flat Hd. Screw (A) (Left Hand) M6 x 25 [1] <1> (1). At first, open the chuck jaw as far as possible and loosen Flat Hd. Screw (A) (Left Hand) M6 x 25 [1] <1>...
  • Page 17 c. (For keyed chuck only) Secure the drill chuck with a disassembly tool: Ring (J-78) to the drill chuck, which in proper sequence should be secured with a vise. Then fit a disassembly tool: Wrench Ass'y (J-140) to the spindle, and turn it counterclockwise to loosen the drill chuck.
  • Page 18 (2) Removal of the shift lever Position the Shift Lever Ass'y [15] <15> (15) as shown in Fig. 11. Push both ends of the Retaining Ring (E-type) for D15 Shaft [18] <18> (18) with a pair of long-nose pliers until a clearance about 1 to 2 mm is made. Keeping the clearance, turn the Shift Lever Ass'y [15] <15>...

  • Page 19: Reassembly

    8-2. Reassembly Reassembly can be accomplished by following the disassembly procedures in reverse. However, special attention should be given to the following items. 8-2-1. Internal wire arrangement (1) Arrange the internal wires according to "8-4. Internal Wire Arrangement and Wiring Work". (2) Be careful not to catch the internal wires when mounting the handle cover.
  • Page 20 8-2-4. Reassembly of the gear cover section Figure 12 shows the assembly drawing. Reassemble the gear cover section according to the following figure. Models D 13VH and D 10VJ Second Pinion and Gear Set <11> (11) Pin D5 <20> (20) Shift Arm <19>...
  • Page 21 Model D 13VB3 (With slip clutch) Second Pinion and Gear Set [11] Pin D5 [20] Shift Arm [19] Shift Lever Ass'y [15] Washer (B) [10] Steel Ball D3.5 [17] Spring (H) [16] Gear Set [21] Ball Bearing 6202DDCMPS2L [6] Retaining Ring for D35 Hole [5] Spindle (D) [4] Fig.

  • Page 22: Wiring Diagrams

    8-3. Wiring Diagrams (1) For products with noise suppressor Fig. 14 (2) For products without noise suppressor Fig. 15 --- 19 ---...

  • Page 23: Internal Wire Arrangement And Wiring Work

    8-4. Internal Wire Arrangement and Wiring Work A. Internal wire arrangement (1) For products with noise suppressor Noise suppressor Fig. 16 --- 20 ---...
  • Page 24 (2) For products without noise suppressor Fig. 17 --- 21 ---...
  • Page 25 B. Switch connection (1) Wiring of reversing switch Fig. 18 (2) Wiring of speed control switch Fig. 19 --- 22 ---...

  • Page 26: Insulation Tests

    AC 2,500 V/1 minute, with no abnormalities 110 V --- 127 V (except U.K. products) 8-6. No-Load Current Value After no-load operation for 30 minutes, the no-load current value should be as follows. Model D 13VB3 Voltage (V) Current (A) Max.

  • Page 27: Standard Repair Time (Unit) Schedules

    9. STANDARD REPAIR TIME (UNIT) SCHEDULES Variable 60 min. MODEL Fixed Work Flow D 13VB3 Switch Handle Cover Cord Cord Armor Housing Stator General Assembly Armature Inner Cover (A) Ball Bearing Second Pinion (608DD) and Gear Set Ball Bearing (698T1)

  • Page 28: For Models D 13Vh And D 10Vj

    Variable MODEL 60 min. Fixed Work Flow D 10VJ D 13VH Handle Cover Switch Cord Armor Cord Housing Stator General Assembly Armature Inner Cover (B) Ball Bearing Second Pinion (608DD) and Gear Set Ball Bearing (698T1) Spindle (E) Gear Cover (A) Ball Bearing Shift Lever (6202DD)
  • Page 29 Hitachi Power Tools LIST NO. E107 ELECTRIC TOOL PARTS LIST DRILL 2004 • • Model D 13VB3 (E1)
  • Page 30 PARTS D 13VB3 ITEM CODE NO. DESCRIPTION REMARKS USED 995-344 FLAT HD. SCREW (A) (LEFT HAND) M6X25 987-576 CHUCK WRENCH FOR 13VLB-D, 13VLR-D 321-814 DRILL CHUCK 13VLRB-D 1 INCLUD. 1, 2 319-546 DRILL CHUCK 13VLRE-N (W/O CHUCK WRENCH) 323-971 SPINDLE (D) 939-556 RETAINING RING FOR D35 HOLE (10 PCS.)
  • Page 31 PARTS D 13VB3 ITEM CODE NO. REMARKS DESCRIPTION USED 953-327 CORD ARMOR D8.8 500-409Z CORD (CORD ARMOR D8.8) 500-247Z CORD (CORD ARMOR D8.8) FOR FIN, NOR, SWE, DEN 500-439Z CORD (CORD ARMOR D8.8) FOR NZL, AUS 500-461Z CORD (CORD ARMOR D8.8) FOR GBR (110V)
  • Page 32 STANDARD ACCESSORIES D 13VB3 ITEM CODE NO. DESCRIPTION REMARKS USED 323-050 SIDE HANDLE 303-709 DEPTH GAUGE Printed in Japan --- 4 --- * ALTERNATIVE PARTS 11 -- 04 (041115N)
  • Page 33 Hitachi Power Tools LIST NO. E108 ELECTRIC TOOL PARTS LIST DRILL 2004 • • Model D 13VH (E1)
  • Page 34 322-517 CHOKE COIL (BROWN) 220V-240V 1 EXCEPT FOR KUW, INA, SAU, SIN 999-041 CARBON BRUSH (1 PAIR) 955-203 BRUSH HOLDER HITACHI LABEL 994-273 NOISE SUPPRESSOR 1 FOR FRA, AUS, SAF, CHN 992-635 EARTH TERMINAL 1 FOR FRA, AUS, SAF, CHN...
  • Page 35 PARTS D 13VH ITEM CODE NO. REMARKS DESCRIPTION USED 500-423Z CORD 1 (CORD ARMOR D8.8) FOR KUW, SIN 500-468Z CORD 1 (CORD ARMOR D8.8) FOR CHN 11 -- 04 * ALTERNATIVE PARTS --- 3 -- -...

  • Page 36: Standard Accessories

    STANDARD ACCESSORIES D 13VH ITEM CODE NO. DESCRIPTION REMARKS USED 323-050 SIDE HANDLE 303-709 DEPTH GAUGE OPTIONAL ACCESSORIES ITEM CODE NO. DESCRIPTION REMARKS USED 321-814 DRILL CHUCK 13VLRB-D INCLUD. 1, 2 --- 4 --- Printed in Japan 11 -- 04 * ALTERNATIVE PARTS (041115N)
  • Page 37 Hitachi Power Tools LIST NO. E106 ELECTRIC TOOL PARTS LIST DRILL 2004 • • Model D 10VJ (E1)
  • Page 38 1 FOR NZL, AUS, EUROPE, CHN 322-518 CHOKE COIL (BROWN) 110V 1 FOR TPE 999-041 CARBON BRUSH (1 PAIR) 955-203 BRUSH HOLDER HITACHI LABEL 994-273 NOISE SUPPRESSOR 1 FOR TPE, NZL, AUS, EUROPE, CHN 992-635 EARTH TERMINAL 1 FOR TPE, NZL, AUS, EUROPE, CHN 321-631...
  • Page 39 PARTS D 10VJ ITEM CODE NO. REMARKS DESCRIPTION USED 984-750 TAPPING SCREW (W/FLANGE) D4X16 937-631 CORD CLIP 953-327 CORD ARMOR D8.8 500-409Z CORD 1 (CORD ARMOR D8.8) 500-447Z CORD 1 (CORD ARMOR D8.8) FOR SYR 500-439Z CORD 1 (CORD ARMOR D8.8) FOR NZL, AUS 500-470Z CORD 1 (CORD ARMOR D8.8) FOR TPE...
  • Page 40 STANDARD ACCESSORIES D 10VJ ITEM CODE NO. DESCRIPTION REMARKS USED 323-050 SIDE HANDLE 303-709 DEPTH GAUGE OPTIONAL ACCESSORIES ITEM CODE NO. DESCRIPTION REMARKS USED 322-370 DRILL CHUCK 10VLRG-N (W/O CHUCK WRENCH) --- 4 --- Printed in Japan 11 -- 04 * ALTERNATIVE PARTS (041115N)

Table of Contents