Motorola Netopia 2200 Series User Manual page 100

Parameter Descriptions
The following tables describe SafeHarbour's parameters that are used for an IPSec VPN
tunnel configuration:
Field
Name
Peer External IP
Address
Encryption
Protocol
Authentication
Protocol
Key Management
Field
Name
Peer Internal
Network
Peer Internal
Netmask
NAT enable
100
Table 2: IPSec Configuration page parameters
The Name parameter refers to the name of the configured tunnel. This is
mainly used as an identifier for the administrator. The Name parameter is
an ASCII value and is limited to 31 characters. The tunnel name does not
need to match the peer gateway.
The Peer External IP Address is the public, or routable IP address of the
remote gateway or VPN server you are establishing the tunnel with.
Encryption protocol for the tunnel session.
Parameter values supported include NONE or ESP.
Authentication Protocol for IP packet header. The three parameter values
are None, Encapsulating Security Payload (ESP) and Authentication Header
(AH)
The Key Management algorithm manages the exchange of security keys in
the IPSec protocol architecture. SafeHarbour supports the standard Inter-
net Key Exchange (IKE)
Table 3: IPSec Tunnel Details page parameters
The Name parameter refers to the name of the configured tunnel. This is
mainly used as an identifier for the administrator. The Name parameter is
an ASCII value and is limited to 31 characters. The tunnel name does not
need to match the peer gateway.
The Peer Internal IP Network is the private, or Local Area Network (LAN)
address of the remote gateway or VPN Server you are communicating with.
The Peer Internal IP Netmask is the subnet mask of the Peer Internal IP
Network.
Turns NAT on or off for this tunnel.
Description
Description