Motorola Netopia 2200 Series User Manual page 84

Enter the DHCP Start Address and End Address of the subnet range in their respec-
tive fields.
Ranges cannot overlap and there may be only one range per subnet.
• Click the
• When you are finished adding subnets, click the
prompted, restart the Router.
To delete a configured subnet, set both the IP address and subnet mask values to 0.0.0.0,
either explicitly or by clearing each field and clicking the
change.
☛
If you make any changes, click the
84
Submit
button.
NOTE:
All additional DHCP ranges use the global lease period value. See
Save Changes
Submit
Save Changes
button.
Check the Enabled checkbox
Submit
and click the
The screen expands to
allow you to enter subnet
information.
If DHCP Server (see
below) is not enabled, the
DHCP Start Address and
DHCP End Address fields
do not appear.
Enter the Router's IP
address on the subnet in
the IP Address field and
the subnet mask for the
subnet in the Netmask
field.
button, and when
button to commit the
page
button.
82.