Systemview Menu - JVC SW-D7000U Instruction Manual

SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
" The images for that camera on tape have been corrupted and cannot be decoded at time
of Playback.
" The VCR Play speed is very slow.
This indicator helps the operator to tell the difference between images that are not being updated
during Playback and images that are being updated from tape but have no movement within the
image.
The indicator 'A' will be displayed with the corresponding camera image on Monitor-A if there
was an active alarm at the time that the recording was made.
Adjusting VCR brightness and contrast:
The SW-D7000U provides a simple front panel adjustment to digitally adjust the
contrast and brightness of the Playback signal from the VCR.
used to compensate for some VCRs, which output a higher or lower video signal
level than the standard.)
Select PLAY mode and then select the Playback camera image to be enhanced full-screen on
Monitor-A. Use the arrow keys to adjust the signal.
Brightness:
Use the up/down arrow keys to adjust the brightness.
Contrast:
Use the left/right arrow keys to adjust the contrast.
3.7.13

SYSTEMVIEW MENU

This menu is provides a view of all settings and parameters of your multiplexer. It is a reference
list only and cannot be changed except through accessible installation menus.
JVC PROFESSIONAL, IMAGING PRODUCTS
(This can also be
41