Table of Contents
Advertisement
SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
Pop-up menus are the last levels in the menu system. In general, use the left/right arrow keys to
select sections in the Pop-up menu and then use the up/down arrow keys to make changes to
the values. There are, however, some Pop-up menus where the arrow keys have additional
functionality.
In Pop-up menus, there are no EXIT selections. To exit a Pop-up menu without making any
changes, press the MENU key or else select [CANCEL] and press the ENTER key. To exit and
save the changes made, select [OK] and press the ENTER key.
CAUTION:
Pressing MENU to exit from a sub-menu will not save the changes made in that
sub-menu. The MENU key is the same as CANCEL.
3.7.3
THE AVAILABLE MENUS
If you are installing or programming the unit, the Menu Bar enables you
to select Main or QuickInstall using the installer's password. However
the Operator password will enable you to select OPERATOR or
SYSTEMVIEW only. To do this, highlight the one that you want using
the left or right arrow keys and press ENTER.
Main
3.7.4
THE OPERATOR MENU
The OPERATOR Menu gives you access to all the programmable operator options, in logical
sub-sections.
3.7.5
FIELD/FRAME SETTING
You can switch the resolution of digital full-screen displays from 'frame' displays to 'field' displays.
The lower resolution 'field' displays can result in less 'flickering' on some high contrast camera
scenes.
To switch between 'field' resolution and 'frame' resolution on a full-screen display, select the
Field/Frame menu item to display the selection menu as below;
36
JVC PROFESSIONAL, IMAGING PRODUCTS
QuickInstall
Field / Frame Display
Sequencing
Time / Date Display
Title Display
Playback Format
Alarm History
Operator Password
Normal Record Speed
Exit
Field/Frame Setup
Display:
[CANCEL]
[OK]
Operator
Frame
SystemView
SystemView 1
SystemView 2
SystemView 3
SystemView 4
SystemView 5
SystemView 6
Advertisement
Table of Contents
