Table of Contents
Advertisement
SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
Pop-up menus are the last levels in the menu system. In general, use the
left/right arrow keys to select sections in the Pop-up menu and then use the
up/down arrow keys to make changes to the values. There are, however, some
Pop-up menus where the arrow keys have additional functionality.
In Pop-up menus, there are no EXIT selections.
To exit a Pop-up menu without making any changes, press the MENU
key or else select [CANCEL] and press the ENTER key. To exit and
save the changes made, select [OK] and press the ENTER key.
CAUTION: Pressing MENU to exit from a sub-menu will not save the changes made in that
sub-menu. The MENU key is the same as CANCEL.
3.7.3
THE AVAILABLE MENUS
If you are installing or programming the unit, the Menu Bar enables you
to select Main or QuickInstall using the installer's password. However
the Operator password will enable you to select OPERATOR or
SYSTEMVIEW only. To do this, highlight the one that you want using
the left or right arrow keys and press ENTER.
Main
3.7.4
THE OPERATOR MENU
The OPERATOR Menu gives you access to all the programmable operator options, in logical
sub-sections.
3.7.5
FIELD/FRAME SETTING
You can switch the resolution of digital full-screen displays from 'frame' displays to 'field'
displays. The lower resolution 'field' displays can result in less 'flickering' on some high contrast
camera scenes. To switch between 'field' resolution and 'frame' resolution on a full-screen
display, select the Field/Frame menu item to display the selection menu as below:
34
JVC PROFESSIONAL, IMAGING PRODUCTS
QuickInstall
Field / Frame Display
Sequencing
Time / Date Display
Title Display
Playback Format
Alarm History
Operator Password
Normal Record Speed
Exit
Operator
SystemView 1
SystemView 2
SystemView 3
SystemView 4
SystemView 5
SystemView 6
SystemView
Advertisement
Table of Contents
