Zoom; Selecting Vcr As An Input (Vcr View); Summer / Winter Time Change - JVC SW-D8000U Instruction Manual

SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
3.6.3

ZOOM

The SW-D8000U provides a digital 2X
ZOOM
or Play modes. is not available on Monitor-B.
To ZOOM an image:
First select a full-screen display on Monitor-A and then press the
desired, the image can be frozen before it is zoomed. Zoom operates on either a
frozen or a non-frozen display. A zoomed signal can be frozen.
Electronic Pan & Tilt:
On all zoomed displays on Monitor-A use the arrow keys to pan and tilt to different
sections of the zoomed image.
Indicator:
ZOOM
There is an on-screen
ZOOM
key is lit.
NOTE: The ZOOM key must be pressed again to unZOOM the display.
3.6.4

SELECTING VCR AS AN INPUT (VCR VIEW)

The operator may need to view the video output of the VCR. Typically this is to check VCR
output or settings.
To select the VCR as an input:
FUNCTION
Press and then press
To de-select the VCR as an input:
Repeat the above procedure.
NOTE: When VCR VIEW is exited, the unit always reverts to Live mode.
3.6.5

SUMMER / WINTER TIME CHANGE

Setting the time requires the operator to know the menu password. In some installations
personnel with access to the menus are not available to reset the unit's clock during time
changes for summer and winter. The SW-D8000U provide a shortcut to set time forward by an
hour in Spring and back by an hour in the Fall, using the following Function key sequence.
To adjust the clock by an hour for Summer/Winter time changes press
FUNCTION
and then press the
In April, this will cause the time to adjust forward by one hour.
In October, this will cause the time to adjust back by one hour.
This function can only be used once in each period.
SEQUENCE
is pressed during April it will add an hour to the time, but if
SEQUENCE
is pressed again then it will be ignored until October.
NOTE: If the Master/Slave selection is used to set up one multiplexer in an installation as a
master clock, the Summer/Winter time change can be done on just the Master
unit. The master clock will control the time and date display for the other
JVC PROFESSIONAL, IMAGING PRODUCTS
ZOOM
on full-screen displays on Monitor-A, during Live
indication when ZOOM mode is in effect, and the LED in the
PLAY
SEQUENCE
key.
ZOOM
key. If
FUNCTION
For example, if
FUNCTION
+
+
29