Table of Contents
Advertisement
SW-D8000U, 16CH. COLOR VIDEO MULTIPLEXER
To change the position and color of the title for any camera:
Select a full-screen view of that camera on Monitor-A, and then press ENTER several times to
toggle the title position and color. The operator can select one of seven options for each
camera.
The following cycle will be followed as the
q
Top, black
q
Top, gray
q
Top, white
q
Bottom, black
q
Bottom, gray
q
Bottom, white
q
Do not display this camera title
q
Repeats from top...
NOTE:
This setting affects only the Monitor-A display. Text on the Monitor-B display is not
moved.
3.1.7
MONITOR-B DISPLAYS
Monitor-B is a full-screen, analog switching display of the Live input cameras. It displays only
full-screen, Live images, regardless of the mode selected. The operator can select a fixed
display of any one camera on Monitor-B, or a sequenced display of several cameras.
Monitor-B Sequence list and Dwell time:
There are independent sequences, which operate on Monitor-A and Monitor-B. Refer to the
AutoList™ feature.
To operate on Monitor-B:
MONITOR-B
Press the
B
key is pressed again.
SEQUENCE
key will operate on Monitor-B and not on Monitor-A.
To select a camera full-screen on Monitor-B:
Press the camera number key while the Monitor-B LED is on.
To start Monitor-B sequencing:
SEQUENCE
Press the
To stop Monitor-B sequencing:
SEQUENCE
Press
again, or press a camera number to select a fixed display on
Monitor-B, while the Monitor-B LED is on.
3.2
RECORDING
In Record mode, single fields from up to 16 video input channels are assembled to form a
continuous multiplexed video signal, which can then be recorded on a VCR according to a pre-
programmed recording list.
JVC PROFESSIONAL, IMAGING PRODUCTS
ENTER
key first. The LED by the key will light until the
While the LED remains lit, the camera keys and the
key while the Monitor-B LED is on.
key is pressed:
MONITOR-
21
Advertisement
Table of Contents
