Optional Equipment - Pioneer PHR100-55 Instruction Manual

The indirect sensor allows the installer to operate the heater with two temperatures: one for central
heating and the other for the SuperStor Indirect Water Heater. This allows the user to increase water
temperature supplied to the indirect to get faster recovery by prioritizing flow at a higher rate than may be
needed for central heating. NOTE: This application requires two separate circulators. (See Optional
Equipment, Section C).
C. OPTIONAL EQUIPMENT
Below is a list of optional equipment available from HTP:
•
System Sensor (Part # 7250P-324)
•
Indirect Tank Sensor (Part # 7250P-325)
•
3" Stainless Steel Outside Termination Vent Kit (V1000)
•
4" Stainless Steel Outside Termination Vent Kit (V2000)
•
2" PVC Concentric Vent Kit (Part # KGAVT0501CVT)
•
3" PVC Concentric Vent Kit (Part # KGAVT0601CVT)
•
U.L. 353 Compliant Low Water Cut-Off Interface Kit with Manual Reset (Part # 7450P-225)
•
Alarm System (Part # 7350P-602) (to monitor any failure)
•
PC Connection Kit (Part # 7250P-320)
•
Condensate Neutralizer (Part # 7450P-212)
•
Vision 2 Temperature Mixing Control (Part # 7250P-322)
These additional options may be purchased through your HTP distributor.
11