Table of Contents
Advertisement
Menu system
T
/D
>
IME
ATE
MAIN MENU
TIME/DATE
TIME FORMAT
TIME
DATE FORMAT
DATE
SYNCHRONIZE
• Fill in the actual time and date.
• Select either a 12-hour or a 24-hour clock format.
• Select from three date formats which show either the month (MM), the
day (DD) or the year (YYYY) first.
>> Synchronize
• Use the
function to set the time of the unit from the time of
Synchronize
the network. (Synchronize only works if the Divar time is within 7½
minutes of the server time.) Fill in the IP address of the network time
server.
• The time and date of all other connected units are automatically
synchronized every hour from the time and date of the unit with DVR
ID 1.
5-6
24 HOUR
14:00:17
YYYY-MM-DD
2002-06-19
>
V
S
>
IEW
ETTINGS
The
menu allows you to set up the display of the individual
View Settings
cameras. You can also set the sequence in which the cameras are displayed and
the duration. Use the
Configure Monitors
displays.
MAIN MENU
VIEW SETTINGS
CAMERA SETUP
SEQUENCES
CONFIGURE MONITORS
>> Camera setup
Use the
menu to access the submenus for setting the camera
Camera Setup
names, for locking cameras and for controlling cameras.
>>> Camera name
• Select a camera by pressing a camera key on the unit. The number
of the camera is the number of the connector at the rear of the unit
to which it is connected.
• Enter a name for the selected camera. The name can be up to 16
characters long.
>>> Camera lock-out
• Locked cameras are not visible during normal use.
• Place a check mark under the number of the camera you wish to
lock or press a camera key on the unit to switch the lock on or off.
• Select the
Set Password
restrict access to the camera lock-out menu.
submenu to set up the monitor
submenu and fill in a 4-digit password to
Philips Communication, Security & Imaging
>
>
>
Advertisement
Table of Contents
