Panasonic KX-NCP500 Manual page 49

KX-NT321
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR card in the Primary PBX (PBX IP Address)
Select "PBX".
Press SP-PHONE.
To enter the IP address of the Secondary PBX (if required)
Select "Secondary
PBX".
Press HOLD twice to return
to the Menu screen.
To set VLAN parameters
To the VLAN settings
OR
To end programming
Press STORE.
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT's power off,
and (2) hold the STORE button and 2 key while turning the power on.
Document Version 2009-12
Press PROGRAM
while "Searching" is displayed.
Select "PBX IP
Press SP-PHONE.
Address".
PBX IP Address
Press SP-PHONE.
The IP-PT will reboot
and can then be
registered to the PBX.
4.4.1 Assigning the IP Addressing Information
Press SP-PHONE.
Select "Primary
PBX".
Press SP-PHONE.
PBX IP Address
Press SP-PHONE.
IP Networking Guide 49