Panasonic KX-NCP500 Manual page 78

4.5.1 Registering IP Telephones
3. a.
Highlight numbers and names and click the right
arrow to select them for registration.
b.
Click Next. A screen will appear with information
on the current IP-PT extension number and name,
and index number for programming.
Note
•
If the IP-PT has been connected to the
LAN and power has been turned on, the IP
address of the IPCMPR card will be
assigned automatically.
•
If not, connect the IP-PT to the LAN and
turn the power on within 15 minutes after
this operation is done. The IP address of
the IPCMPR card will then be assigned
automatically.
c.
If the registration is still in progress, the dialog box
will show "Registration Executing".
If the registration is successful, the dialog box will
show "Registration Completed". Click Close.
Once the IP-PT is successfully registered, the status of the IP-PT will update to show "Registered".
Registration of SIP Extensions
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the PBX image of
IPCMPR Virtual Slot at the top of the screen.
c.
Click Select Shelf.
d.
Move the mouse pointer over the V-SIPEXT32
card. A menu will be shown under the mouse
pointer.
e.
Click Port Property.
2. Assign extension numbers to the SIP Extensions.
•
If the Automatic Extension Number Set for
Extension Card feature is enabled, the extension
numbers of SIP Extension are automatically
assigned. To program this feature, refer to
"3.40 [1-3] Option—
Automatic Extension Number Set for Extension
Card" in the PC Programming Manual.
•
If not, enter the extension number for each SIP
Extension manually.
78 IP Networking Guide
New Card Installation—
Document Version 2009-12