Panasonic KX-NCP500 Manual page 71

KX-NT300 series (except KX-NT321)
To start programming
SETUP
Press "SETUP"
when it is displayed.
To configure the port number of PTAP Ports
Select "PTAP Server Port".
Port No.
1024 – 65535
To configure the port number of PTAP Ports for the Secondary PBX (optional for
software version 2.00 or later only)
Select "PTAP Server Port".
Port No.
1024 – 65535
Select "PTAP Client Port".
To configure the port number of DHCP Ports
Select "DHCP Server Port".
Select "DHCP Client Port".
Continued on next page
Document Version 2009-12
Select "IP Port". ENTER
Software version 2.00 or later only
ENTER Select "Primary PBX".
ENTER
ENTER Select "Secondary PBX".
ENTER
ENTER
ENTER
ENTER
Password
7678
ENTER
ENTER
Port No.
1024 – 65535
Port No.
67, 1024 – 65535
Port No.
68, 1024 – 65535
4.4.4 Configuration of IP Ports
ENTER
ENTER
ENTER
ENTER
IP Networking Guide 71