Table of Contents
Advertisement
00838A-D-R255-SG_19~42
6/10/05
9
Check the date and time.
No Disc
• if it is : Correct, press OK button then the date and time will
be saved. If you don't press the OK button, the date
and time will be saved automatically after 5 seconds.
• if it is : Incorrect, input correct Time, Date, Year using †...œ
√ buttons or number buttons. Press OK button then
the date and time will be saved. When you need to
change clock setting, you can set it up manually.
Now, DVD Recorder is ready for use.
I
Function for "Plug & Auto Setup" is fixed
NOTE
already. So if you want to change this fixed
one, you can change it by Presetting the
Stations in OSD "Presetting Channels with
the Manual setup function" menu.
(See page 29)
Auto Set up function can be performed by
I
pressing é (STOP) on the unit continuously
for 5 seconds or more during power off with
no disc inserted
Setting the Clock
This menu is used to set the current time.
You need to set the time to use timer recording.
With the unit in Stop mode/No Disc mode,
1
press the MENU button.
No Disc
3:47 PM
Page 27
Setup
Programme
Setup
Time
Date
Auto Clock
12 : 00
01 / JAN / 2005
SAT
On
MOVE
OK
RETURN
EXIT
.
Timer Record
Programme
Timer Record
√ √
Setup
MOVE
OK
RETURN
EXIT
Press the ...† buttons to select Setup, then
2
press the OK or √ button.
No Disc
Programme
System
Clock Set
Setup
Language
Audio
Video
Parental Control
Install
MOVE
OK
RETURN
Press the ...† buttons to select Clock Set,
3
then press the OK or √ button.
Use navigation ...†œ √ buttons to input Time, Date
or Year. Use number buttons to input clock data
directly.
No Disc
Programme
Setup
Time
Date
12 : 00
01 / JAN / 2005
MOVE
OK
RETURN
Press the ...† buttons to select On for the
4
Auto Clock.
No Disc
Programme
Setup
Time
Date
12 : 00
01 / JAN / 2005
MOVE
OK
RETURN
Press the OK button, then the date and
5
time will be saved.
If you don't press the OK button, it will not be saved.
You must have the RF cable connected to
I
set the Auto Clock. See page 19
NOTE
The DVD Recorder automatically sets the
I
clock according to the time signal
broadcast between the channels PR1 to
PR5. If you do not need the Auto clock
set function, select Off.
Setup
√ √
√ √
√ √
√ √
√ √
√ √
√ √
EXIT
Clock Set
Auto Clock
SAT
Off
EXIT
Clock Set
Auto Clock
SAT
Off
EXIT
27
English -
Advertisement
Table of Contents
