Setting Up The Progressive Scan; Canceling The Progressive Scan - Toshiba D-R255-SG Owner's Manual

00838A-D-R255-SG_19~42 6/10/05
Setting up the Progressive
scan
If the TV supports Progressive Scan, press the
P.SCAN button on the front of the DVD Recorder to
enjoy.
1 With the unit in Stop mode, press the
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Progressive
scan mode. Otherwise press [No]" will appear. Press
the œ √ buttons to select Yes, and then press the OK
button.
The message "Please set your TV to
2
Progressive
[STOP] key." will appear. Press the OK
button.
3 The message "Video Output Mode
Progressive Scan" will appear.
Progressive setting is only available when
I
the Video Out is set to Component.
NOTE
If the P.SCAN button on the DVD
I
recorder's front panel is pressed during
playback, the message "This function is
possible only on stop mode" appears on
the screen.
Progressive setting is only available when
I
the DVD recorder is in stop mode.
3:47 PM Page 37
Press [Yes] to confirm Progressive scan mode.
Otherwise press [No]
Yes No
input. To deactivate, press
Please set your TV to Progressive input.
To deactivate, press [STOP] key.
OK
Video Output Mode
Progressive Scan
Canceling the Progressive
scan
With the unit in Stop mode, press the
1
P.SCAN button on the front of the DVD
Recorder.
The message "Press [Yes] to confirm Interlace scan
mode. Otherwise press [No]" will appear. Press the œ
√ buttons to select Yes, and then press the OK
button.
Press [Yes] to confirm Interlace scan mode.
Otherwise press [No]
Yes No
2 The message "Please set your TV to
Interlace input. To deactivate, press [STOP]
key." will appear. Press the OK button.
Please set your TV to Interlace input,
To deactivate, press [STOP] key.
OK
3 The message "Video Output Mode Interlace
Scan" will appear.
Video Output Mode
Interlace Scan
Do not press the P.SCAN button if you
I
are using a TV that does not support
NOTE
Progressive mode. Nothing will be
displayed on the screen if pressed.
If you press the P.SCAN button by
I
mistake when your TV does not support
Progressive mode, you need to release
the Progressive mode. To release the
Progressive mode, press the P.SCAN
button on the front panel 3 times.
The screen will recover after the PSO
LED on the front panel display turns off.
37
English -