Recording From External Equipment You Are; Watching - Toshiba D-R255-SG Owner's Manual

00838A-D-R255-SG_43~51 6/10/05
Recording from external
equipment you are

watching

Before you start
Check that the disc has enough available space for the
recording. Adjust the recording mode.
Press the OPEN/CLOSE button, place a
1
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close
the disc tray.
Wait until "LOAD" disappears from the front panel
display.
If an unused DVD-RAM disc is used, whether to
format or not will be asked first. (See page 42)
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 42)
3 Press the INPUT SEL. button to select the
input source according to the connection
you made.
The front panel display changes in the following
sequence:
©
PR Number
If you connect a digital camcorder, press the
INPUT SEL. button to select DV.
(See page 46)
4 Press the REC MODE button repeatedly,
(or press the REC MODE button, then
press the ...† button) to select the
recording speed(quality).
© ©
SP
3:48 PM Page 45
© © © ©
AV1 AV2 AV3
© ©
LP EP XP
Record Mode SP (02:12)
5 Press the REC button.
To pause recording
Press the button to pause a recording in progress.
Press the button again to resume
G
recording.
You can switch channels by pressing the
G
( / )
buttons while recording pauses.
To stop recording
Press the STOP (
recording in progress.
When using DVD-RAM/DVD-RW/DVD-R discs, the
G
message 'Updating the information of disc.
Please wait for a moment' is displayed.
You can not change the recording mode
I
and input source while recording or
NOTE
Pause.
Recording will stop automatically if
I
there is no free space left for recording.
Up to 99 titles can be recorded onto a
I
disc.
Recording will stop automatically if a
I
copy protected image is selected.
DVD-RAM/DVD-RW discs must be
I
formatted before starting to record.
Most new discs are sold unformatted.
DV
Do not use DVD-R authoring discs with
I
this unit.
PROG
) button to stop or finish a
English -
45