Commands; Initialization And Default Setting Instructions - Brother HL-1050 Technical Reference Manual

2/19/04
3.

COMMANDS

3.1.

Initialization and Default Setting Instructions

DF - Default set instruction
DF[;]
• Returns the graphics mode to the default conditions.
• The following are the default settings.
Function
Plot mode
Relative character direction
Line type
Line pattern length
Window
Relative character size
Symbol mode
Tick length
Standard character set
Alternate character set
Character set
Character slant
Scaling
Label terminator
Chord angle
Fill type
Fill distance
Fill slant
Pen Thickness
NOTE:
IN - Initialize set instruction
IN[;]
• Returns the graphics mode to the following initial conditions;
Function
Plot mode
Relative character direction
Line type
Line pattern length
Window
Relative character size
Symbol mode
Tick length
Standard character set
Alternate character set
Character set
Character slant
Scaling
Label terminator
Chord angle
Equivalent
Instruction
PA;
DR 1,0;
LT;
LT;
IW;
SR;
SM;
TL;
CS 0;
CA 0;
SS;
SL 0;
SC;
DT chr$(3)
-----
FT;
FT;
FT;
PT;
The location of the scaling points(P1, P2) remains constant.
Equivalent
Instruction
PA;
DR 1,0;
LT;
LT;
IW;
SR;
SM;
TL;
CS 0;
CA 0;
SS;
SL 0;
SC ;
DT chr$(3)
-----
CHAPTER 9 HP-GL - 6
Condition
Absolute plotting
Horizontal
Solid line
4% of distance from P1 to P2
Set at limits of printable area
according to paper size
Width=0.75% of |P2x - P1x|
Height=1.5% of |P2y - P1y|
Off
X-axis: 0.5% of |P2y - P1y|
Y-axis: 0.5% of |P2x - P1x|
Character set 0
Character set 0
Standard character set selected
0 degrees
Off
chr$(3)
5 degrees
Bi-directional fill, type 1
1% of distance from P1 to P2
0 degrees
Set at 0.3 mm
Condition
Absolute
Horizontal
Solid line
4% of distance from P1 to P2
Set at limits of printable
area according to paper size
Width=0.75% of |P2x-P1X|
Height=1.5% of |P2y-P1y |
Off
X-axis: 0.5% of |P2y-P1y |
Y-axis: 0.5% of |P2x-P1x|
Character set 0
Character set 0
Standard character set
selected
0 degrees
Off
chr$(3)
5 degrees