Change Emulation Mode - Brother HL-1050 Technical Reference Manual

2/19/04

4.1.14. Change emulation mode

EscCRGL
This command changes the emulation mode to HP-GL mode.
EscCRAB
This command changes the emulation mode to BR-Script Batch mode.
EscCRAI
This command changes the emulation mode to BR-Script Interactive mode.
EscCRI
This command changes the emulation mode to IBM Proprinter XL mode.
EscCRE
This command changes the emulation mode to Epson FX-850 mode.
Depending on the model, you can also switch between emulation modes using the printer's control panel (see
the User Guide).
Emulations available for each model are listed below.
HL-1050
HL-1070
HL-1250
HL-1270N
HL-P2500
HL-1660e
HL-2060
HL-2400C
HL-2400Ce
HL-3400CN
HL-1650/1670N
HL-3260N
HL-2460
HL-1450
HL-1470N
HL-7050
HL-1850/1870N
HL-5040
HL-5050/5070N
HL-2600CN
HL-3450CN
(27)(13)(71)(76)
(27)(13)(65)(66) <1Bh><0Dh><41h><42h>
(27)(13)(65)(73) <1Bh><0Dh><41h><49h>
(27)(13)(73) <1Bh><0Dh><49h>
(27)(13)(69) <1Bh><0Dh><45h>
PCL HP-GL BR-Script2
CHAPTER 2 "PCL" - 22
<1Bh><0Dh><47h><4Ch>
BR-Script3 Epson
FX-850 Proprinter XL
PR2000070
IBM