Page Set Up - Brother HL-1050 Technical Reference Manual

6.2.

Page set up

Set page length
EscCn (27)(67)n
This command sets the page length in lines.
or
EscCNULn (27)(67)(00)n
• This command sets the page length in inches.
• The top of form position is set to be the current line.
• n is the number of lines that make up one page, or the length of the page in inches, according to
which form of the command is used.
• If the first form of the command is used (n = the number of lines in the page) the current line spacing
setting is used to determine the length of the page.
• If the first form of the command is used, n must be in the range 1 to 127.
• If the second form of the command is used (n = page length in inches), n must be in the range 1 to 14.
LPRINT CHR$(27); CHR$(67); CHR$(40); '40 lines per page
LPRINT CHR$(27); CHR$(67); CHR$(0); CHR$(11); '11 inches per page
<1Bh><43h>n
<1Bh><43h><00h>n
CHAPTER 6 EPSON - 13
2/19/04