Page Set Up - Brother HL-1050 Technical Reference Manual

Hide thumbs Also See for HL-1050:
Table of Contents

Advertisement

Enable out-of-paper sensor
Esc9
(27)(57)
The printer ignores this command.
Disable out-of-paper sensor
Esc8
(27)(56)
The printer ignores this command.
6.2.

Page set up

Set page length
EscCn
(27)(67)n
This command sets the page length in lines.
or
EscCNULn (27)(67)(00)n
 This command sets the page length in inches.
 The top of form position is set to be the current line.
 n is the number of lines that make up one page, or the length of the page in inches, according to which form
of the command is used.
 If the first form of the command is used (n = the number of lines in the page) the current line spacing setting
is used to determine the length of the page.
 If the first form of the command is used, n must be in the range 1 to 127.
 If the second form of the command is used (n = page length in inches), n must be in the range 1 to 14.
LPRINT CHR$(27); CHR$(67); CHR$(40); '40 lines per page
LPRINT CHR$(27); CHR$(67); CHR$(0); CHR$(11); '11 inches per page
Set left margin
Escln
(27)(108)n
 This command sets the left margin in columns from the left edge of the page. The width of a column is the
current character width.
 In proportional spacing mode a column width of 1/10" is adopted.
 This command clears all tab settings.
 The minimum space allowed between the left and right margins is 1/5".
LPRINT CHR$(27); CHR$(108); CHR$(10); 'Left margin 1" at 10 cpi
Set right margin
EscQn
(27)(81)n
 This command sets the right margin in columns from the left edge of the page. The width of a column is the
current character width.
 In proportional spacing mode a column width of 1/10" is adopted.
 This command clears all tab settings.
 The minimum space allowed between the left and right margins is 1/5".
LPRINT CHR$(27); CHR$(81); CHR$(72); 'Right margin 6" at 12 cpi
Set perforation skip
EscNn
(27)(78)n
 This command sets the bottom margin and enables perforation skip, that is, whenever the print position
reaches the bottom margin the printer performs a page eject and moves the print position to the top of the
next page.
 n = the number of lines at the current line spacing setting between the bottom margin and the bottom edge of
the paper.
 n must be in the range 1 to 127.
 Esc C (Set Page Length) and Esc O (Cancel Perforation Skip) cancel automatic perforation skip.
<1Bh><39h>
<1Bh><38h>
<1Bh><43h>n
<1Bh><43h><00h>n
<1Bh><6Ch>n
<1Bh><51h>n
<1Bh><4Eh>n
CHAPTER 6 EPSON - 13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents