3.1.6. PJL job offset on/off
Format
@PJL SET/DEFAULT JOBOFFSET=ON/OFF
Parameter
ON:
Paper is ejected offset by each job.
OFF:
Paper is ejected together.
Default = ON
Explanation
This command selects the job offset.
This command is ignored when the Finisher/Stapler unit is not available.
The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.
3.1.7. PS job offset on/off
Command
Parameter
bool
Paper is ejected offset by each job.
True:
Paper is ejected together.
False:
Default = false
Explanation
This command selects the job off set.
This command is ignored when the Finisher/Stapler unit is not available.
<Example>
<<BRjoboffset true>>setpagedevice
3.1.8. PCL job separate (Esc&l1T)
Command
Esc&l1T (27)(38)(108)(49)(84)
Explanation
This command separates the job.
This command is ignored when the Finisher/Stapler unit is not available.
APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 6
<1Bh><26h><6ch><31h><54h>