Brother HL-1050 Technical Reference Manual page 258

Variables Description
INTRAY5SIZE Returns the size information for the optional lower paper cassette.
INTRAY6SIZE Returns the size information for the optional lower paper cassette.
SOURCETRAY Selects the paper source tray.
XOFFSET Sets the X offset ( horizontal offset ) value.
YOFFSET Sets the Y offset ( vertical offset ) value.
DUPLEX Duplex mode
BINDING Returns the setting of binding edge selection for duplex printing.
FIRSTPRINT First print mode. This makes the first print speed faster by starting
the polygon mirror motor at Power On. Setting to MIDDLE is
effective only for the first page after Power ON. Setting to HIGH
makes the scanner motor rotate continuously.
DENSITY Returns the printing density level setting from 1 to 15. The default
value is 8.
LANG Returns the language for control panel and status readback
information.
CPLOCK Returns the lock status of the control panel. If OFF, the control
panel is unlocked. If ON, the control panel is locked.
PASSWORD Password for panel lock to write to the NVRAM with the
DEFAULT/INITIALIZE command.
ECONOMODE Toner Saving Mode
ECONOLEVEL Level for Toner saving mode. If set to 1, approx. 50 % toner is
saved. If set to 2, approx. 25% toner is saved.
MPTRAY MP Tray Priority For AUTO feeder selection mode.
TIMEOUT Sets the timeout value for Automatic interface switching (seconds)
AUTOFF Sets the auto FF setting to ON or OFF.
TIMEOUTFF Sets the timeout value for auto FF. (seconds)
AUTOSLEEP Power Save Mode
TIMEOUTSLEEP Timeout for Power Save mode. The printer goes into the power
save mode after this time-out period (minutes).
MEDIATYPE Media Type. The temperature of fixing unit is adjusted depending
on this setting.
REPRINT Sets the reprint function.
COLLATE Sets the collate printing.
HOLD Specifies whether the received data is stored in the hard disk or
HOLDTYPE Specifies the document type of the received data which has been
stored in the optional hard disk. If PRIVATE is selected, a
password is required for the data to be printed or deleted.
HOLDKEY Specifies the password when the document type is set to PRIVATE. 0 to 9 (4 digits to be selected)
TIMESETYEAR Clock: year setting
TIMESETMONTH* Clock: month setting
TIMESETDAY Clock: date setting
Sample Value Range
(same as INTRAY1SIZE)
(same as INTRAY1SIZE)
AUTO, MPTRAY, TRAY1, TRAY2, TRAY3, TRAY4, TRAY5
-500 to 500 dots
-500 to 500 dots
ON, OFF
LONGEDGE, SHORTEDGE
NORMAL, MIDDLE, HIGH
1 (lighter) to 15 (darker)
ENGLISH, FRENCH, GERMAN, DUTCH, SPANISH, ITALIAN, NORWEGIAN, FINNISH, PORTUGUESE, DANISH, SWEDISH,
CZECH, POLISH, HUNGARIAN, RUSSIA, BULGARIAN, ROMANIAN, SLOVAKIAN, JAPANESE
OFF, ON
0 to65535
OFF, ON
1, 2
CASSETTE, FIRST
1 to 99
ON or OFF
1 to 99
ON, OFF
1 to 99
REGULAR, THICK, THICK2, TRANSPARENCY, THIN, BOND, ENVELOPES, ENVTHICK, ENVTHIN, RECYCLED, POSTCARD,
LABEL
OFF, ON, JOB
ON, OFF
OFF, STORE, PROOF
PUBLIC, PRIVATE
1998 to 2039
1 to 12
1 to 31
CHAPTER 5 PJL - 51