Pioneer CDJ-400 Service Manual page 35

5
7
Remove the slot-in mechanism section.
7
Slot-in mechanism section
Note: Attach the ground wire in the specified direction.
If you don't, it will come into contact with the capacitor.
Direction of the dampers when attaching them
When attaching the dampers, place them so that their
projections (large) face front.
Projection (large)
To the front
5
6
Damper
CDJ-400
6
7
3
Slot-in mechanism Assy
1
Remove the three screws.
2
Remove the mecha. plate.
1
1
Mecha. plate.
Note of earth spring
• Be sure not to lose it.
• Be careful to the installation
places.
Earth spring
This boss is not installation position.
3
Unhook the four hooks.
4
Remove the slot-in mechanism Assy.
3
3
7
8
1
2
• Confirm it by viewing.
Mecha. plate.
Earth spring
slot-in mechanism Assy
3
4
3
8
A
B
C
D
E
F
35