Selector Leds Do Not Light; Electric And Gas Dryers; Selector Leds Do Not Light - Frigidaire Dryer Servicing

Section 3 Electronic Control Testing

Electric and Gas dryers; selector LEDs do not light.

Note: Always check wiring to the components.
3-30
Yes.
Defective interface
board.
Defective
harness.
Repair or
replace harness.
Selector LEDs do
not light.
Do any of the LEDs light
No.
Check the wiring harness between
the control board and the interface
board.
Good
harness.
Replace the interface
board. If this does not
correct the problem,
replace the control
board.