Silent Mode Programming - „Sil" Function - Bosch Compress 3000 DW FO Installation Instructions Manual

▶ Repeat the above described operations for the operating
periods of days „6 and 7".
Completed definition of the 2
„6 and 7" concludes the definition of the operating periods.
1 2
Fig. 31 Definition of periods
[1] Start of 1st period
[2] End of 1st period
nd
[3] Start of 2 period
nd
[4] End of 2 period
Switching off the operating period
▶ Select the start schedule and end of functioning for the
same time.
The operating period will be switched off.
5.6.3 Silent Mode programming - „Sil" function
Setting a lower speed will decrease the
appliance efficiency marginally. Activate the
lower speed only in situations where lower
noise levels are to be achieved.
In cases of moderate/strong wind it is highly
recommended to DO NOT use the silent
mode, unless the air outlet of the appliance is
not directly exposed to the wind. Direct and
moderate/strong wind on the air outlet grille
may result in an abnormal operation of the
appliance with larger heating times.
The „Sil" function allows the selection of the ventilator speed in
order to get lower noise levels.
The device is factory set with the highest fan speed activated.
Compress 3000 DW FO
nd
operating period for days
3 4
6720646160-38.1V
Fig. 32 „Sil" function
Setting the silent mode periods
2 silent mode periods will be set in each of the programming
steps:
• 2 periods for days „1 to 5"
– Start of 1st period
– End of 1st period
• 2 periods for days „6 to 7"
– Start of 2nd period
– End of 2nd period
Programming of silent mode periods
▶ Access the „Sil" function.
▶ Press „ok".
Display shows the start schedule of the 1st silent mode
period in blink mode.
▶ Use the „+" and „-" keys to set the silent mode start
schedule.
▶ Press „ok".
Blinking display shows silent mode stop schedule for the
1st period.
▶ Use the „+" and „-" keys to set the silent mode duration.
▶ Press „ok".
Blinking display shows the start schedule for the 2nd silent
mode period.
▶ Use the „+" and „-" keys to set the silent mode start
schedule of the 2nd period.
▶ Press „ok".
Blinking display shows the silent mode stop schedule for
the 2nd period.
▶ Use the „+" and „-" keys to set the silent mode duration.
▶ Press „ok".
Days „1 to 5" are now set
▶ Repeat the above described operations for the silent mode
periods of days „6 and 7".
Completed definition of the 2nd silent mode period for
days „6 and 7" concludes the silent mode programming.
Operation Instructions | 29
6720801244-14.1V
6 720 801 244 (2013/08)