Troubleshooting; Factory Configurations; Selecting The Temperature Units - „°C" Or „°F - Bosch Compress 3000 DW FO Installation Instructions Manual

32 | Operation Instructions
▶ Press „-".
Displays with blinking „del" indication.
Fig. 37 „del" function
▶ Press „ok".
The meter restarts the count.
5.7

Troubleshooting

This device is equipped with a troubleshooting function. Error
indication is performed by means of a code (Table 6, page 40)
corresponding to the error indication symbol in the digital
display (Fig. 17, [6]). In most cases, the device will only return
to normal functioning following elimination of the cause of the
malfunction and resetting of the device.
To identify the malfunction, see Section 7.
-
menu
Fig. 38 Error code
Resetting the system
▶ Press the „ok" key and hold it down for more than 3
seconds.
6 720 801 244 (2013/08)
6720646160-42.1V
+
ok
6720800765-04.1V
-
menu
> 3 s
Fig. 39 Resetting the system
5.8

Factory configurations

Upon setting the temperature units and timetable, the device
will operate according to the factory set values.
Heating mode: „Combi" ( section 5.6.1)
Manual functioning: „manual" ( section 5.4)
Fig. 40 Initial menu
5.9 Selecting the temperature units - „°C" or „°F"
st
Upon the 1 use, the user must select the temperature unit.
Fig. 41 Selecting the temperature units
▶ Press the „+" or „-" key to select the temperature unit.
+
ok
6720646160-21.1V
6720801244-01.1V
6720646160-34.1V
Compress 3000 DW FO