Brother DCP-9055CDN Service Manual page 342

(7) Release the Hook to remove the Registration/Pinch roller gear bush from the Base frame
unit.
Registration/Pinch
roller gear bush
Gear position: Refer to
(8) Remove the two Taptite bind B M3x8 screws. Slide the MP drive shaft as shown in the
figure. Remove the MP upper cover ASSY from the PF ASSY.
Separation R shaft bush
MP upper cover ASSY
Hook
Base frame unit
Fig. 3-230
" PF ASSY."
Taptite bind B M3x8
Fig. 3-231
MP drive shaft
PF ASSY
3-161
Taptite bind B M3x8
Confidential