Using A Bluetooth Headset; Data Capture; Laser Scanning - Motorola MC3000 User Manual

2 - 26 MC3000 User Guide

Using a Bluetooth Headset

You can use a Bluetooth headset for audio communication when an audio enabled application is used. See
Chapter 3, Using Bluetooth
the mobile computer's volume is set appropriately before putting the headset on. When a Bluetooth headset is
connected the speaker is muted.
NOTE If the mobile computer goes into suspend mode the Bluetooth connection is disabled and the mobile
computer automatically switches to speakerphone mode.

Data Capture

The mobile computer has an integrated scanner or imager that collects data by scanning bar codes.

Laser Scanning

To scan bar codes with the mobile computer:
Ensure that the mobile computer is loaded with a scanning application.
1.
If the mobile computer is equipped with a rotating head, adjust the head prior to scanning.
2.
Aim the scan window at the bar code.
3.
Press the scan button or trigger. Ensure the red scan beam covers the entire bar code. The Scan LED
4.
Indicators illuminate red to indicate that the laser is on. The Scan LED Indicators illuminate green and a beep
sounds to indicate a successful decode.
Right
Laser Aiming
Figure 2-27
Optimal scanning distance varies with bar code density and scanner optics.
Hold the scanner farther away for larger symbols.
•
Move the scanner closer for symbols with bars that are close together.
•
NOTE Scanning procedures depend on the application and mobile computer configuration. An application may use
different scanning procedures from the one listed above.
for information on connecting a Bluetooth device to the mobile computer. Ensure that
Wrong