Motorola MC3000 User Manual page 88

3 - 16 MC3000 User Guide
Prior to creating a connection, ensure the following:
• Bluetooth phone is turned on.
• Bluetooth phone is discoverable. (Some phones may also need to be pairable in order to accept a bonding
request. For more information, refer to the phone documentation.)
• Mobile computer's and phone's Bluetooth radios are turned on.
• Mobile computer and phone are within range of each other (30 feet/10 meters).
Complete the following steps to create a new Bluetooth connection. Before setting up dial-up networking, obtain
dial-up information and other necessary settings for the office network or ISP.
1. Ensure the mobile computer is discoverable and connectable. See
2. Discover and bond (pair) with the remote device.See
3. In , select the
BTExplorer
4. Select the
Trusted Devices
5. Tap the remote device folder.
6. Tap and hold on
window appears.
Entry
Figure 3-22 Select Dial-up Networking Entry Window
NOTE If a dial-up entry is not listed, see
7. Select a dial-up entry.
8. Tap . The mobile computer begins to communicate with the phone. If required, the phone requests
OK
permission to communicate with the mobile computer.
9. Confirm the connection on the phone. The
folder.
Remote Devices
folder.
and select
Dial-up Networking
Add a Dial-up Entry on page
Bluetooth Settings on page
Bonding with Discovered Device(s) on page
from the pop-up menu. The
Connect
3-17.
window appears.
Network Log On
3-21.
3-9.
Select Dial-up Networking