Motorola VC6000 Series Product Reference Manual page 143

Troubleshooting the VC6000 Series (Continued)
Table 10-1
Problem
The VC6000 Series Vehicle ignition key in OFF
does not power on. position.
SIM door is open.
Drained vehicle battery.
Vehicle battery not installed
properly.
System crash.
Low Battery level Vehicle battery Voltage
warning is issued. dropped below 9 V DC.
LCD and Keypad Critical Battery level. Vehicle
backlight do not battery Voltage dropped
function. below 8V DC.
Display backlight Display temperature is below
intensity is reduced. 10 °C or above 35 °C (below
50 °F or above 95 °F).
The VC6000 Series VC6000 Series temperature
powers off during is out of range: -20 °C to 60
operation. °C (-4 °F to 140 °F).
Tapping the buttons Screen is not calibrated
or icons does not correctly.
activate the
The system is not
corresponding
responding.
feature.
A message appears Too many files stored on the
stating that the VC6000 Series.
VC6000 Series
memory is full.
Cause
Switch the vehicle ignition key to the ON position.
Close the SIM door properly and secure screw.
Charge or replace battery.
Ensure battery is installed properly.
Press the Power button. If the VC6000 Series still does not turn
on, Perform a warm boot. If the VC6000 Series still does not turn
on, perform a cold boot. (see Resetting the VC6000 Series on
page 1-10).
Start the vehicle engine to charge the battery.
Replace battery.
Start the vehicle engine to charge the battery. Replace battery.
Control the temperature inside the vehicle.
Control the temperature inside the vehicle.
To resume operation, momentarily press the Power Button.
Re-calibrate the screen. Tap Start > Settings > System tab >
Screen icon > Align Screen button.
Warm boot the system (see Resetting the VC6000 Series on
page 1-10).
Delete unused memos and records. If necessary, save these
records on the host computer (or use an SD memory card for
additional memory).
Maintenance & Troubleshooting 10 - 5
Solution