Motorola VC6000 Series Product Reference Manual page 146

A - 2 VC6000 Series Product Reference Guide
VC6096/VC6000 Specifications
Table A-1
Interface Ports: (2) USB 1.1 host Type A connectors
(1) USB 1.1 device Type mini-B connector
(1) 10/100 Base-T Ethernet port
(1) 50 pin auxiliary port to support:
(1) SAE J1708 or SAE J1939 connection for reading from and writing to the engine bus (VC6096
only)
(2) Full RS-232 connections
(8) Digital inputs (switch to ground or switch to vehicle battery voltage)
(8) Digital outputs (relay driver, 200mA drive capability)
(2) Analogue inputs, up to 34V maximum
Audio: Headset mode (via Bluetooth wireless headset); speakerphone mode (via internal speaker and
microphone); volume control
Expansion Slot: SD slot for MMC and non-SDHC SD memory cards
Antenna: Combination WLAN/WWAN external antenna; internal Bluetooth antenna; external GPS
antenna
Performance Characteristics
CPU: XScale™ PXA270 624 MHz processor
Operating System: Microsoft® Windows Mobile® 6.1 Professional Edition
Memory 128MB SDRAM/256MB Flash
(RAM/ROM):
User Environment
Operating Temp: -20° to 60° C/-4° to 140° F
Storage Temp: -40° to 60° C/-40° to 140° F
Relative Humidity: Up to 95% non-condensing at 50° C
Environmental IP64 (dust tight and able to withstand splashing from any direction)
Sealing:
ESD: ±15kV air discharge, ±8kV direct discharge
Mechanical Shock: MIL-STD 810E 516.4, Procedure 1 - Functional Shock
Crash Hazard: MIL-STD-810E, 516.5 Proc VI
Thermal Shock: -40° F to +176° F/-40° C to +80° C
Salt Fog: MIL-STD 810F (survives eight hours of 5 percent salt solution fog at 35° C)
Vibration: MIL-STD 810E, Method 514.4, Ground Mobile (VIII)
Solar Radiation: MIL-STD 810E, Method 505.3, Procedure I