Presser Foot Pressure Selection Dia; Change Sewing Direction - Zanussi ZAN2250 User Manual

FOOT PRESSURE SELECTION DIAL
FOOT PRESSURE SELECTION DIAL
CHAPTER III ST ART SEWING
CHAPTER III ST ART SEWING
(1) Pattern selection dial: 1 or 2 (2) stitch length: 1.5 - 4 (3) presser foot for needlework:
zigzag (4) pressure of thread tension disc: 2-6
Raise presser foot and put cloth beside leg wire of needle plate.Turn forward the balance wheel
and lower the needle down into the fabric. Lower presser foot and make sure that thread is pla-
ced backward. Step down fool controller. Fabric will go along leg wire and is carned forward auto-
matically by feed dog. In order to make end of thread firm, please press the reverse stitch buton
and do several reverse stitches. Raise presser foot extract fabric and pull the thread backward.
Clip both threads with a cutter. Leave certain length of thread for future use.

CHANGE SEWING DIRECTION

CHANGE SEWING DIRECTION
13.09.2006 13:33 Uhr
For ordinary sewing, selection dial is present
at " 3 ". And its pressure drops to " 2 " when sewing appliques, mesh fabrics
and embroidery. As for chiffon, lace, yarn and other miscellaneous fine materi-
als, you may put the dial to
" 3 ". Cotton flannel and braided stretch textile
should be adjusted to " 1 ".
(1) Regulatory value indication
Straight stitching
Seite 11
Stop the machine, and turn the balance wheel to bring the needle
down into the fabric. Raise the presser foot. Turn the fabric to change
direction as desired. Lower the presser foot to resume sewing.
9