Change The Needle; Thread And Needle Chart; How To Use Spool Holder - Zanussi ZAN2250 User Manual

13.09.2006
CHANGING THE NEEDLE
CHANGING THE NEEDLE
THEAD AND NEEDLE CHART
THEAD AND NEEDLE CHART
Needle size
Nr. 60 (#7)
Nr. 70 (#10)
Nr. 80 (#12)
Nr. 80-9O (#12-14)
Nr. 90-100 (#14-16)
Nr. 90-100 t#14-18)
Elastic stitching
Nr. 70 (#10)
HOW T HOW T O USE SPOOL O USE SPOOL HOLDER HOLDER
(fig.1) + (fig.2)
13:32 Uhr Seite 7
Turn forward the balance wheel while raising the needle to the high level and lower the
presser foot. Loosen the needle clamp bolt by turning it anti-clockwise.Remove the
used needle and insert the new one with its flat side facing the back. While inserting the
needle, the needle should be pressed as firmly as possible up into the needle clamp,
which should he tightened with a screwdriver.
Note!
Regular checking should be done to ensure that the needle is never twisted or blunt.
Knitting materıals, lıne silk or silk fabrıcs may frequently encounter knots and skipping
stitches, which are often caused by the damaged needles.
Material
Fine silk
Crepe
Poplin Pure Silk
Woolen, cloth Cotton
Wool
Jeans Materials
Knitting Materials
Spool holder is used lo hold spools.Pulling up the spool holder when
sewing.
Prees the spoolholder down, when the machine is packed
Pressdown the machine when it is packed.
(1) upper tread (2) hole (fig.1)
Instruction:
(fig.2)
In case that the thread in use is easily tangled with spool holder or
knotted, you can pull the thread through the hole as shown in the
illustration. While keeping the hole facing the spool.
Cotton thread Specification
70-80
50-60
40-50
30-40
30
70-80
5
Silk thread Specification
100-140
80-lOO
60-70
50-60
45-50
100-140