Epson DM-D500 Installation Manual page 22

English
3. Pass the cable for the
DM-D500 through the hole
on fixing plate A, and fix
the cable at the bottom as
shown in illustration 48.
4. Connect the cable for
the DM-D500 to the
DC connector on the
TM printer as shown
in illustration 49.
5. Store any excess cable in the
support, and attach the
DM-D500 to fixing plate A as
shown in illustration 50.
6. Peel off the Velcro tapes, and attach the display to the setting
position.
Assembling using screws
1. Follow steps 2 and 3 in "Assembling
using Velcro tapes."
2. Secure fixing plate A to the setting
position with fixing screws as shown in
illustration 51.
3. Attach the DM-D500 to fixing plate A.
20 DM-D500 Installation Guide
48
49
50
51