Precautions When Connecting To A Tm Printer - Epson DM-D500 Installation Manual

Customer display

Hide thumbs Also See for DM-D500:

Table of Contents

❏ TM-U950 printer. You can attach the DM-D500 to the TM-U950

printer using the "DM-D pole unit for TM printers (Type A)"

(DP-502). (See page 7.)

❏ TM-H6000 series and TM-U675 printers. You can attach the

DM-D500 to TM-H6000 series and TM-U675 printers using the

"DM-D pole unit for TM printers (Type A)" (DP-502). (See

page 9.)

❏ TM-T88II, TM-U210, TM-U230, TM-T90, and TM-L90 printers.

You can attach the DM-D500 to these printers using the "DM-D

pole unit for TM printers" (DP-505). (See page 14.)

❏ Other TM printers. You can attach the DM-D500 using the

"DM-D pole unit for TM printers (Type A)" (DP-502) and

Velcro tapes or screws. (See page 18.)

❏ DM-D stand. You can attach the DM-D500 directly to the

DM-D stand using the "DM-D stand unit for DM-D500"

(DP-501). When using the DM-D stand, an optional power

supply unit (PS-180) is required. Also, if you want to raise the

height of the DM-D500, an optional extension support unit

(DP-105) is required. (See page 21.)

Precautions When Connecting to a TM Printer

Before the DM-D500 is connected to a TM printer, check the serial

number on the label affixed to the rear or bottom of the TM printer.

If the serial number is one of the numbers listed in the following

table, the printer can be connected to the DM-D500 without an

additional board. If the serial number is not listed in the table, the

DM-D500 requires the latest model of the UB-S01 board (Part code:

C8233610200).

DM-D500 Installation Guide 3

English

Table of Contents